BÖHLER A930
BÖHLER A930 is a stainless ferritic-austenitic steel of the 25%Cr type. Highest corrosion resistance and good strength properties. Good weldability, heat treatment after welding is not required.
Excellent resistance to general corrosion, stress corrosion cracking, vibration cracking, pitting and crevice corrosion as well as erosion corrosion.
Max. operating temperature for long-term use: 280°C (short-term exceeding up to 300°C permissible).
Required surface finish:pickled or machined.
BÖHLER A930 (UNS S32550, 1.4507, F61) is the original super duplex stainless steel. As such, it was the first alloy to be called “super duplex” and is based on a chromium content of 25 %. Compared to the later alternatives UNS S32750 and UNS S 32760, it is the only grade with an increased copper content for better pitting corrosion resistance.
Components in offshore, waste water, seawater desalination and chemical plants with aggressive chloride-containing media, e.g. heat exchangers, separator parts, compressor and pump components, turbine blades.
Formas de productos disponibles
Productos largos: Los datos presentados se refieren exclusivamente a productos largos. Consulte las explicaciones detalladas al final de la ficha técnica (pdf).
Ruta de fusión
Aire fundido
Características de la propiedad
Acero inoxidable austenítico ferrítico-(Súper Dúplex).
Resistencia a la corrosión superior gracias a la adición de cobre.
Muy buenas propiedades de resistencia y tenacidad.
Buena soldabilidad, no es necesario un tratamiento térmico tras la soldadura.
Excelente resistencia a la corrosión en general, al agrietamiento por tensiones, agrietamiento por fatiga, corrosión por picadura, corrosión por grietas y erosión.
Números de materiales
- Market grade
- F61
- SEL
- 1.4507
- EN
- X2CrNiMoCuN25-6-3
- UNS
- S32550
Estándares
- EN ISO
- 10088-3
- ASTM
- A276/A276M
- ASTM
- A182/A182M
- ASTM
- A479/A479M
Chemical Composition
* Composición química (% promedio)
- C
- max. 0.04
- Si
- max. 1.00
- Mn
- max. 1.50
- P
- max. 0.040
- S
- max. 0.030
- Cr
- 24.0 to 27.0
- Mo
- 2.9 to 3.9
- Ni
- 4.5 to 6.5
- Cu
- 1.50 to 2.50
- N
- 0.10 to 0.25