Melting Route

Airmelted + Remelted

Product Description

BÖHLER W302 ISOBLOC is a 5% chromium steel and corresponds to material number 1.2344 (X40CrMoV5-1). Produced via the electroslag remelting process (ESR), this tool steel has very high hot toughness as well as very high hot hardness and a very good resistance against heat-checkings. The combination of these properties makes it a top performer in closed- and open-die forging as well as in high- and low-pressure die casting. In addition, this material has very good polishability and is therefore also often used as a molding material for plastic injection molds.

Property Features

  • Toughness & Ductility: high
  • Wear Resistance: high
  • Machinability: very high
  • Hot Hardness (red hardness): high
  • Polishability: very high
  • Thermal conductivity: good
  • Micro-cleanliness: high

Technical Specifications

Material Numbers


1.2344 T20813 X40CrMoV5-1 H13 SKD61 B1885


Standards


4957 G4404 #207

Chemical Composition

Chemical composition (average %)
0.39 0.90 0.40 5.20 1.40 0.95

Available product shapes

Information on Long Products ) Presented data refer exclusivly to long products. Please observe the detailed explanations at the end of the data sheet (pdf).

  • Long Products
  • Open Die Forgings
  • Plates

Fairs & Events

Contacts

BÖHLER Spain

Contact our sales team

+34 934 609 901

Contact us

Please use a browser that is not outdated.

You are using an outdated web browser.

Errors may occur when using the website.